20 Best Permatex Liquid Solder [2022]

Are you looking for the best permatex liquid solder? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling permatex liquid solder.

We Recommended:

# Preview Product
1 Permatex 25909 Liquid Metal Filler, 3.5 oz. Permatex 25909 Liquid Metal Filler, 3.5 oz.
2 Permatex 85120 Liquid Electrical Tape, 4 oz , Black Permatex 85120 Liquid Electrical Tape, 4 oz , Black
3 Permatex 22058 Dielectric Tune-Up Grease, 3 oz. Tube Permatex 22058 Dielectric Tune-Up Grease, 3 oz. Tube
4 Permatex 84109 PermaPoxy 4 Minute Multi-Metal Epoxy, 0.84 oz. , Grey Permatex 84109 PermaPoxy 4 Minute Multi-Metal Epoxy, 0.84 oz. , Grey
5 Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black
6 STAR BRITE Liquid Electrical Tape with Applicator Brush Cap Black4 OZ. (084104B) STAR BRITE Liquid Electrical Tape with Applicator Brush Cap Black4 OZ. (084104B)
7 Comstar 10-801 Copper Lock, No Heat Solder, 10 mL Comstar 10-801 Copper Lock, No Heat Solder, 10 mL
8 Electrically Conductive Wire Glue Electrically Conductive Wire Glue
9 UV Light Curing Glue Liquid Plastic Welder Adhesive Kit 5 Seconds Fix/Fill/Seal/Bond/Repair Almost... UV Light Curing Glue Liquid Plastic Welder Adhesive Kit 5 Seconds Fix/Fill/Seal/Bond/Repair...
10 MG Chemicals - 4860P-35G 4860P 63/37 No Clean, Leaded Solder Paste, 35 g (1.2 oz) Pneumatic... MG Chemicals - 4860P-35G 4860P 63/37 No Clean, Leaded Solder Paste, 35 g (1.2 oz) Pneumatic...
11 Comstar Metal Lock, Black HVAC No Heat Solder, 2 oz. Plastic Container (10-900) Comstar Metal Lock, Black HVAC No Heat Solder, 2 oz. Plastic Container (10-900)
12 Comstar Copper Lock, No Heat Solder for Copper & Brass Pipes Create a Permanent Leak-Proof Bond... Comstar Copper Lock, No Heat Solder for Copper & Brass Pipes Create a Permanent Leak-Proof Bond...
13 Permatex 84133 2-Ton Epoxy Permatex 84133 2-Ton Epoxy
14 SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar
15 Solder SILVER SOLDER PASTE (1 piece) Solder SILVER SOLDER PASTE (1 piece)
16 Permatex 80345 White Lithium Grease, 1.5 oz. Permatex 80345 White Lithium Grease, 1.5 oz.
17 Permatex 25217 Fast Orange Pumice Lotion Hand Cleaner, 1/2 Gallon Permatex 25217 Fast Orange Pumice Lotion Hand Cleaner, 1/2 Gallon
18 No Clean Lead Free Low Temperature Solder Paste 15 Grams No Clean Lead Free Low Temperature Solder Paste 15 Grams
19 Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz
20 Mountains of Madness Mountains of Madness
Bestseller No. 1
Permatex 25909 Liquid Metal Filler, 3.5 oz.
  • Works on metal, wood and concrete
  • Excellent adhesion to galvanized metal
  • Repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations
  • Resists water, oil and gasoline
  • Suggested Applications: Oil pans, stake bed holes, door panels, cast metal parts
SaleBestseller No. 2
Permatex 85120 Liquid Electrical Tape, 4 oz , Black
  • Weatherproof protectant for wiring and electrical connections
  • Goes on as a liquid and dries to a flexible vinyl polymer
  • Resists dirt, dust, chemicals, and moisture, ensuring that connections stay intact
  • Brush top applicator allows coverage without gaps
  • Suggested Applications: Ignition Wires, Underground Wiring, Outdoor Lighting Fixtures, Bilge Pumps, Terminal Blocks, Exposed Wires
SaleBestseller No. 3
Permatex 22058 Dielectric Tune-Up Grease, 3 oz. Tube
  • Protects Electrical Connections And Wiring From Salt, Dirt And Corrosion
  • Prevents Voltage Leaks Around Any Electrical Connection
  • Extends The Life Of Bulb Sockets
  • Required For Modern High Energy Ignition Systems
Bestseller No. 4
Permatex 84109 PermaPoxy 4 Minute Multi-Metal Epoxy, 0.84 oz. , Grey
  • Versatile, easy-to-use, multi-metal dark grey epoxy adhesive that eliminates the need for welding or brazing
  • Water and solvent resistant epoxy sets in 4 minutes with no clamping needed; permanent strength up to 4500 PSI
  • Fills gaps and will not shrink; when cured can be drilled, sanded, threaded or filed
  • Temperature Range: -60°F to 300°F (-51°C to 149°C)
  • Suggested Applications: Ideal for complex, multi-piece assemblies; bonds rigid materials including aluminum, brass, chrome, copper, iron, stainless...
Bestseller No. 5
Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black
  • 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing
  • Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper; can be drilled, tapped, threaded, filed, sanded and painted once cured
  • Over 3,000 PSI shear strength on steel; resists most automotive, shop and cleaning fluids
  • Temperature Range: up to 300°F intermittent
  • Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings
SaleBestseller No. 6
STAR BRITE Liquid Electrical Tape with Applicator Brush Cap Black4 OZ. (084104B)
  • Forms an airtight, protective, waterproof, UV resistant, dielectric coating
  • Prevents corrosion on wires and terminals, protects terminal screws from loosening due to vibration
  • Adheres to all metal, plastic, vinyl, rubber and composite surfaces and can be built-up with additional layers
  • Patented, UL-tested, fast drying formula & easy to use, cap has a brush applicator
  • Made with pride in the United States
Bestseller No. 7
Comstar 10-801 Copper Lock, No Heat Solder, 10 mL
  • ComStar’s Copper Lock is the revolutionary method for soldering pipes! Designed for the US Space Program!
  • Simply apply it inside the connector and/or onto the pipe (or both); making sure the liquid is totally around the circumference, fit in the pipe and...
  • No heat or solder is required to create a permanent leak-proof bond
  • 10ml bottle will bond as many as 40 3/8 inch fittings
  • Exceeds all US Military copper bonding specifications: Mil-S-46163A Type I Grade K, Mil-S-224723E Letter Grade CVV
SaleBestseller No. 8
Electrically Conductive Wire Glue
  • Soldering Gun in a Jar Wire glue-the solution when you can't find the soldering iron, don't want to bother, are out in the woods, don't quite trust a...
SaleBestseller No. 9
UV Light Curing Glue Liquid Plastic Welder Adhesive Kit 5 Seconds Fix/Fill/Seal/Bond/Repair Almost...
  • Not A Normal Glue,Much Stronger Than Any Other Glue Guaranteed, Fix Other Glue Cannot and You Can Even Build Up Material with It, and That Material is...
  • Repair Almost Anything: Plastic,Glass,Wood,Metal,Fabric,Stainless Steel, PVC,ABS,Acrylic,Ceramic And More. From the Precious Jewelry to Multiple Craft...
  • Creates a Permanent Bond In 5-10 Seconds With the Prep Pad Clean The Bonding Face And Cure&Shape Under The UV Light. The UV Curing is Very Fast and...
  • Safe,Non-hazardous Formula,Water Proof and Heat Resistant. Used Advanced Technology, It is also Environmental Safe and Passed the EU 174 Project...
  • Kit Includes: (1) 1 Glue Pen + (2) 8g Refill+(1)UV Light With Battery. Please Follow the Instruction on the Backside.
Bestseller No. 10
MG Chemicals - 4860P-35G 4860P 63/37 No Clean, Leaded Solder Paste, 35 g (1.2 oz) Pneumatic...
  • No Clean Flux (Residues are Non-corrosive, Non-conductive)
  • Easily Dispensed
  • Excellent Wettability
  • Ideal for surface mount applications
  • Complete dispensing unit
SaleBestseller No. 11
Comstar Metal Lock, Black HVAC No Heat Solder, 2 oz. Plastic Container (10-900)
  • ComStar’s Metal Lock Black permanently joins any type of metal pipe and fitting together!
  • No heat or soldering is required
  • It can be used on all metals (matched or mismatched, threaded or unthreaded), aluminum, copper, brass, block iron and steel. It also seals against...
  • Exceeds all US Military copper bonding specifications: Mil-S-46163A Type I Grade K, Mil-S-224723E Letter
  • Environmentally safe
Bestseller No. 12
Comstar Copper Lock, No Heat Solder for Copper & Brass Pipes Create a Permanent Leak-Proof Bond...
  • An environmentally safe method for soldering pipes up to 2 inches (580 mm)
  • A permanent leak-proof bond rated up to 500 psi with a temperature range -60°F to + 300°F
  • Great for all refrigerants with yellow metals, copper, brass pipe fittings & bond them instantly
  • Copper lock helps to test pressure for water systems within 2 minutes and A/C systems within 25 minutes
  • Does not require heat or solder to create a permanent leak-proof bond & can be disassembled at 400°F heat and then reapplied
Bestseller No. 13
Permatex 84133 2-Ton Epoxy
  • repositionable adhesive; bonds together rigid materials. bonds: ceramics, fiberglass, metal, concrete and more!
  • sets in 30 minutes/cures in 1 hour for multiple repairs
  • specially formulated for high clarity and impact strength, up to 4000 psi tensile strength
  • gap-filling and non-shrinking formula
  • resists salt solution, unleaded gasoline, mineral spirits, oil and anti-freeze
Bestseller No. 14
SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar
  • The Ideal Flux For Electrical And Electronic Repairs
  • Contains 2 Ounce In A "Hockey Puck" Jar
  • Formulated For Use With Tin/Lead And Lead-Free Alloys
  • Dimensions: 2.5″ Dia X 1″ H (64 X 25.5 Mm)
Bestseller No. 15
Solder SILVER SOLDER PASTE (1 piece)
  • Manufacturer: Wahl Product Category: Solder RoHS: No Product: Solder Type: Paste Description/Function: Silver bearing solder paste Package Type:...
Bestseller No. 16
Permatex 80345 White Lithium Grease, 1.5 oz.
  • All-purpose white lubricant for metal-to-metal and metal-to-plastic applications
  • Withstands moisture and high heat
  • Protects against rust and makes surfaces friction-free
  • Stainless and non-toxic
  • Suggested Applications: Door hinges, hood latches, trunk latches, hatchback struts, seat tracks, garage door and delivery truck door tracks
SaleBestseller No. 17
Permatex 25217 Fast Orange Pumice Lotion Hand Cleaner, 1/2 Gallon
  • Biodegradable, waterless, petroleum solvent-free hand cleaner
  • Contains no harsh chemicals, petroleum solvents, or ammonia that can sting cuts or abrasions
  • Pure, fresh-smelling natural citrus power does the cleaning
  • Fortified with aloe, lanolin, glycerin, and other skin conditioners soothe raw, rough hands
  • Fine pumice deep cleans the toughest dirt
Bestseller No. 18
No Clean Lead Free Low Temperature Solder Paste 15 Grams
  • Low Melting Point Solder Paste
  • T4 new industry standard
  • Contains Silver for less brittle joint
  • 137C 278F Melting Point (Eutectic)
  • Two dispensing tips 16g and 20g
SaleBestseller No. 19
Permatex 81160 High-Temp Red RTV Silicone Gasket, 3 oz
  • Formulated For Hi-Temp Applications, Or Heavy-Duty Use
  • Replaces Almost Any Cut Gasket, And Coats Pre-Cut Gaskets To Increase Reliability
  • Makes Reliable 'Formed-In-Place' Gaskets That Resist Cracking, Shrinking And Migrating
  • Temperature Range Of -65F To 650F Intermittent

Having trouble finding a great permatex liquid solder?

This problem is well understood by us because we have gone through the entire permatex liquid solder research process ourselves, which is why we have put together a comprehensive list of the best permatex liquid solders available in the market today.

After hours of searching and using all the models on the market, we have found the best permatex liquid solder for 2022. See our ranking below!

How Do You Buy The Best Permatex Liquid Solder?

Do you get stressed out thinking about shopping for a great permatex liquid solder? Do doubts keep creeping into your mind?

We understand, because we’ve already gone through the whole process of researching permatex liquid solder, which is why we have assembled a comprehensive list of the greatest permatex liquid solder available in the current market. We’ve also come up with a list of questions that you probably have yourself.

John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for permatex liquid solder that you consider buying. Your questions might include the following:

  • Is it worth buying an permatex liquid solder?
  • What benefits are there with buying an permatex liquid solder?
  • What factors deserve consideration when shopping for an effective permatex liquid solder?
  • Why is it crucial to invest in any permatex liquid solder, much less the best one?
  • Which permatex liquid solder are good in the current market?
  • Where can you find information like this about permatex liquid solder?

We’re convinced that you likely have far more questions than just these regarding permatex liquid solder, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for permatex liquid solder, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible permatex liquid solder. Make sure that you are only using trustworthy and credible websites and sources.

John Harvards provides an permatex liquid solder buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.

How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available permatex liquid solder currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of permatex liquid solder has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an permatex liquid solder?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your permatex liquid solder.
  5. Customer Ratings: Number ratings grade permatex liquid solder objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their permatex liquid solder.
  7. Product Quality: You don’t always get what you pay for with an permatex liquid solder, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an permatex liquid solder is should be an indication of how long it will work out for you.

John Harvards always remembers that maintaining permatex liquid solder information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding permatex liquid solder is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Related Post: