Are you looking for the best E Ingraham Clock Parts? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling E Ingraham Clock Parts.
We Recommended:
Bestseller No. 1
Youngtown 12888 Snap in Type 4.5mm Hour Shaft Length Continuous Sweep Quartz Clock Movement 8mm...
- Wall clock movement replacement: Snap In Type Clock Accessory with No Bushing.
- Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right...
- Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
- Movement total shaft length is 8mm (5/16 inch),thread length is 4.5mm (11/64 inch).
- Sweep Silent Movement：suitable for 1-2 mm ( 1/25 -5/65 inch ) thickness clock panel.
SaleBestseller No. 2
Bernhard Products Black Wall Clock Silent Non Ticking 10 Inch Quality Quartz Battery Operated Round...
- 10 Inch clock. Large black bold numbers against white face background creates easy viewing. Precise Quartz movements guarantee accurate time
- Silent non-ticking mechanism with sweeping movement. enjoy a quiet environment!
- Sturdy plastic frame and glass lens make it easy to clean and keeps dust away from dial
- The perfect wall clock for an office, classroom, bedroom, bathroom, shop, gym or any room in your home of business
- Lightweight and easy to hang. Powered by 1 "AA" battery - not included. 12 Months Manufacture Warranty
Bestseller No. 4
Takane Quartz Clock Movement Mechanism, Choose Your Hands and Size, USA Made (7/16" Threaded Shaft...
- See full description below for exact specifications
- 5 1/4" minute hand, 4" second hand
SaleBestseller No. 5
ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts
- Size About : 5.6 x 5.6 x 1.5cm/2.2 x 2.2 x 0.6inch. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. ( Please Note:...
- Diameter : The Minute Shaft Diameter is 3.6-3.7mm, and the Hour Shaft Diameter is 5.5mm. Screw Shaft Diameter 7.6mm.
- For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock. The error is less than +-1.5 seconds/day, and the power...
- Powered by 1 AA battery(Not Included, You can use No.5 AA batteries, carbon batteries, alkaline batteries. Cannot Use Rechargeable Batteries).
- IMPORTANT : This model is a 5mm ordinary shaft, which is suitable for clock panel thickness of not more than 4mm, otherwise the front nut cannot be...
SaleBestseller No. 6
2 Pack Non Ticking Wall Miniature Clock Movements Mechanism with 5 Pairs of Short Hands Quartz Motor...
- ✔️ High torque movement: long spindle quartz clock replacement movement parts with metal hook and 5 different pairs of hands(4 black and 1 gold),...
- ✔️Accurate time-keeping&quiet motor:Size-total shaft length is 13 mm (1/2 inches), thread length is 6 mm (1/4 inches); Sweep second movement,...
- ✔️ Five of most popular miniature clock hands: Different Sizes,Colors and Styles. Meet different needs only in one package,perfect for your clock...
- ✔️ Compatible clock: applicable to cross-stitch, Five-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY...
- ✔️ Package contents: 2 clock movement,2 Metal hook,2 Mounting hook,5 Second hands,5 Minute hands,5 Hour hands,5 Plastic washers,5 Brass washers...
Bestseller No. 7
Include Hands Quartz DIY 12888 Wall Clock Movement Mechanism Battery Operated DIY Repair Parts...
- Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.
- Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm); Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable...
- DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick...
- Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and...
- Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
Bestseller No. 8
Youngtown 12888 Step Quartz Movement Repair Part with Hour Trigger Switch.7/64 Inch Maximum Dial...
- Good for repairing, replacing or making a clock.
- Youngtown manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
- Applicable to cross-stitch, three-dimensional embroidery,craft clock, frameless draw clock, etc. INSTRUCTIONS - Included along with the movements.
- Movement total shaft length is 13.5 mm (17/32 inch),thread length is 5.5 mm (7/32 inch).
- Movement suitable for Clock Dial Thickness less than 7/64 inch.
Bestseller No. 9
YQSDG 55mm DIY Tide Quartz Controlled Repair Wall Clock Movement Motor Mechanism Replacement 115mm...
- Size : About 55 x 55 x 15 mm (2.17 x 2.17 x 0.59 inch). The back hand length is about 115mm(4.53 inch). The shaft length is about 17mm(0.67 inch).
- DIY clock replacement supply. Suitable for hand-made and repaired by yourself. You can also replace the broken part of your old clock. Easy to install...
- Fit for Tide Quartz Controlled wall clock replacement movement part. NOT a regular 12 hr clock mechanism.
- Powered by 1 NO.5 AA battery(Not included). You can buy it from the local shop. Energy efficient.
- Accurate time keeping.Quality tide quartz clock movement,long lifetime guaranteed.With ROHS approved.
Bestseller No. 10
Youngtown 12888 Movement for Clock Repair Replacement 13.5mm (17/32 inch) Shaft Length 5.5mm (7/32...
- Package contents: 1 movement, 4 pairs of hands with different shapes, 1 Metal hooks, and some accessories.come with the specially designed protect box...
- Youngtown manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
- Choose the right clock mechanism:total shaft length is 13.5mm (17/32 inch),thread length is 5.5mm (7/32 inch); suitable for 1- 3 mm ( 3/64 -7/64 inch...
- Good DIY clock supply: 2 pairs of hands with different shapes,perfect for clock face in different diameter.suitable for repairing, replacing the...
- Accurate Time-keeping & Quiet Motor: features Youngtown 12888 clock mechanism, which offers watchmaker's accuracy and dependability; equipped with...
Bestseller No. 11
Youngtown 12888 Quartz DIY Wall Clock Movement Mechanism DIY Repair Parts Replacement Fit Dials up...
- Measurement: hand length: total hour hand length: approx. 172 mm (6.8 inches); Total minute hand length: approx. 207 mm (8.1 inches); Second caps:...
- Silent Movement total shaft length is 16 mm ( 41/64 inch ),thread length is 8 mm ( 5/16 inch ),suitable for 2 - 6 mm ( 5/64 - 15/64 inch ) thickness...
- Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the shaft...
- Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.material...
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself.
Bestseller No. 12
VANGOLD Movement for Clock Repair Kit , Wall Clock Movement Mechanisms Battery Powered Clock Kit for...
- Warranty: If the product has any problems with the clock mechanism, you can get a free replacement WITHOUT a return
- Note: The produces the 12888 series clock kits with different models, please compare the detail dimensions between your old one and this one before...
- Size: Total shaft length is 18mm (0.71"), thread length is 6.5mm (0.26");and the shaft can drive long clock hands (10mm to 450mm). (This clock...
- Usage: This high torque clock parts kit is suitable for 1-4mm (0.04"-0.16")thickness clock dial.
- What You Get: The wall clock kit comes with metal hook and a small bag, which you can keep for other usage.(Without clock hands)
Bestseller No. 13
Quartz DIY Wall Clock Movement Mechanism Battery Powered Repair Parts Replacement Kit, Clock...
- 【Clock Mechanism Replacement】Great for repair, replacement or make a clock, applicable to craft clock, frameless draw clock, 3D large wall clock.
- 【Long Hands Size】Hour hand length is about 115 mm/4.5 inch; Total minute hand length is about 145 mm/5.7 inch; Second caps is about 165 mm/6.5...
- 【Ultra-silent Movement】Clock motor sweep silent, no ticking noise, Sweep Silent with No Noise.
- 【DIY Repair Parts】The hand is made of aluminum, can be cut according to the size of the dial, replacement part can use to different wall clock...
- 【Total Shaft Length】20mm/0.8 Inch, Thread length: 14mm/0.6 Inch, for 10 mm/0.4 inch thickness clock panel.
Bestseller No. 14
High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands (Black)
- Clock movement: high torque clock movement with hook, long shaft, drive long clock hands (10 mm to 450 mm)
- Total shaft length: 28 mm (1-1/ 10 inches), thread length: 15.4 mm (3/ 5 inches), suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panel
- Size from the center of the hole to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length;...
- Good DIY clock supply: suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself
- Warm notice: there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent
Bestseller No. 15
Youngtown High Torque Long Shaft Clock Movement Mechanism with 12 Inch Long Spade Hands
- Clock movement replacement: high torque clock with 2 hooks, long shaft, drive long clock hands (10 mm to 450 mm).
- Movement size: Total shaft length is 23 mm (29/32 inch), thread length is 12mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness...
- Size from the hole center to the tip: the hour hand is approx. 203 mm/ 8.0 inches long; The minute hand is about 305 mm/ 12 inches in length.
- DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick...
- Warm notice: when you install them, please keep the hour hand and minute hand parallel; And please do not use too much pressure to avoid bending them.
Bestseller No. 16
12888 Quartz DIY Wall Clock Movement Mechanism Repair Parts Replacement Kit Sweep Silent...
- Good for repairing, replacing or making a clock.
- Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
- Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
- Movement total shaft length: 23 mm (29/32 inch), thread length: 15 mm (19/32 inch).
- Clock Movement suitable for 9 - 13 mm (23/64 - 1/2 inch) thickness clock panel.
Bestseller No. 17
Youngtown 12888 Pendulum Type Movement Step Clock Accessory Quartz DIY Movement Kits,1/2 Inch...
- Good for repairing, replacing or making a clock.
- Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.
- .Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.
- Pendulum type STEP movement, suitable for 9 - 13 mm (9/25 - 1/2 inches) thickness clock panel;Total shaft length: 23 mm ( 9/10 inches), thread length:...
- This clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock...
SaleBestseller No. 18
6 Pieces High Torque Long Shaft Clock Movement Mechanism with Pasters, Hooks and 6 Different Pairs...
- Nice DIY clock repair set: you will get 6 pieces of high torque long shaft clock movements and 6 different pairs of hands, along with 6 pieces hooks...
- Size details: the total shaft length is approx. 13 mm/ 0.51 inches, and the thread length is approx. 5 mm/ 0.19 inches; Sweeping movement is suitable...
- Accurate time keeping and quiet motor: the long shaft clock mechanism will give you great accuracy and dependability, along with sweeping motion,...
- Various usages: these clock repair replacement tools work well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and...
- 6 Different styles of hands: you will have 6 pairs of clock hands in different styles and length for your options, you can choose and match them...
SaleBestseller No. 19
Quartz Pendulum Clock Movement Mechanism DIY Repair Parts Replacement with 2 Pairs Hands and...
- What you receive: pendulum clock movement set comes with 2 pairs of hands, pendulum, and instructions, the whole set is convenient for you to replace...
- Pendulum clock mechanism: approx. 23 mm/ 9/10 inch in total shaft length, 15.4 mm/ 3/5 inch in thread length; Jump second movement, suitable for 9 -...
- Hole center to the tip hand size: the hour hands measure approx. 80 mm/ 3.1 inch and 59 mm/ 2.3 inches respectively, minute hands are approx. 110 mm/...
- Where to use: these clock pendulum movement sets can be applied for cross-stitch, 3-dimensional embroidery, craft clock, frameless draw clock, etc.,...
- For DIY: these pendulum clock movements feature simple and elegant design, these replacement parts suit well to different styles of clock frame, nice...
Bestseller No. 20
EMOON 2 Pack Clock Movement Mechanism with 4 Pairs of Short Hands Battery Silent Sweep Operated...
- Choose the right clock mechanism: Total shaft length: 3/4 in, thread length: 1/2 in, fit clock dials from 1/8 to 3/8 in thick, repair the old clock,...
- Packaged with Care: Comes as two clock movements with 4 pack hands kit in a presentation box with custom foam inserts to protect all from scratching,...
- Decorative Clock Hands: Ornate set of 4 pairs of short clock hands with different styles and length for your options, perfect for clock creations....
- Accurate Time-keeping & Quiet Motor: 2 clock high precision mechanism, double insurance to make sure clock work well and longer; equipped with...
- Keep Time in Style: With EMOON clock hands and mechanism combo, you too can be a clockmaker; perfect for clock replacement, repairing all kinds of...
Having trouble finding a great E Ingraham Clock Parts?
This problem is well understood by us because we have gone through the entire E Ingraham Clock Parts research process ourselves, which is why we have put together a comprehensive list of the best E Ingraham Clock Partss available in the market today.
After hours of searching and using all the models on the market, we have found the best E Ingraham Clock Parts for 2023. See our ranking below!
How Do You Buy The Best E Ingraham Clock Parts?
Do you get stressed out thinking about shopping for a great E Ingraham Clock Parts? Do doubts keep creeping into your mind?
We understand, because we’ve already gone through the whole process of researching E Ingraham Clock Parts, which is why we have assembled a comprehensive list of the greatest E Ingraham Clock Parts available in the current market. We’ve also come up with a list of questions that you probably have yourself.
John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for E Ingraham Clock Parts that you consider buying. Your questions might include the following:
- Is it worth buying an E Ingraham Clock Parts?
- What benefits are there with buying an E Ingraham Clock Parts?
- What factors deserve consideration when shopping for an effective E Ingraham Clock Parts?
- Why is it crucial to invest in any E Ingraham Clock Parts, much less the best one?
- Which E Ingraham Clock Parts are good in the current market?
- Where can you find information like this about E Ingraham Clock Parts?
We’re convinced that you likely have far more questions than just these regarding E Ingraham Clock Parts, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for E Ingraham Clock Parts, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible E Ingraham Clock Parts. Make sure that you are only using trustworthy and credible websites and sources.
John Harvards provides an E Ingraham Clock Parts buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.
How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available E Ingraham Clock Parts currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of E Ingraham Clock Parts has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an E Ingraham Clock Parts?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your E Ingraham Clock Parts.
- Customer Ratings: Number ratings grade E Ingraham Clock Parts objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their E Ingraham Clock Parts.
- Product Quality: You don’t always get what you pay for with an E Ingraham Clock Parts, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an E Ingraham Clock Parts is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining E Ingraham Clock Parts information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding E Ingraham Clock Parts is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!
Related Post:
- Best Flip Clock Alarm Clock
- Best Mantle Clock Repair Parts
- Best Replacement Clock Parts Battery Operated
- Best Hubert Herr Clock Parts
- Best Quartz Cuckoo Clock Parts
- Best Parts Fast Appliance Parts
- Best Dawn Simulator Alarm Clock
- Best Light Alarm Clock
- Best Natural Light Alarm Clock
- Best Dimmable Alarm Clock
FAQ:
Q: How many Ingraham clocks are there?
A: Items 1 – 20 of 67 Clocks Manufactured by The E. Ingraham Company, Bristol, Conn., U.S.A. Includes the following movements: model P self-starting electric.
Q: Who is the founder of the Ingraham Company?
A: In the case of Elias Ingraham, founder of the 19th-century Connecticut company that bore his name, the patents he applied for concerned the design of his cases. Teaching Clock with Silent Movement | Educational Clock that Makes Kids Learning Time Faster and Fun.
Q: What are the dimensions of a Seth Thomas clock?
A: Description: Seth Thomas Clock Company label reproduction measures 11-3/4″ wide x 2-7/8″ tall. Description: Seth Thomas Clock Company label reproduction measures 3″ wide x 5-1/4″ tall. Description: Seth Thomas Clock Company label reproduction measures 8-1/2″ wide x 5-1/2″ tall.