20 Best Arduino Gsm Shield 4g [2024]

Are you looking for the best Arduino Gsm Shield 4g? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling Arduino Gsm Shield 4g.

We Recommended:

# Preview Product
1 Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A) Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)
2 HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot... HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot...
3 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH and Jetson... 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH and Jetson...
4 4G 3G 2G GSM GPRS GNSS HAT Based on SIM7600G-H LTE CAT4 150Mbps Wireless Communication Telephone... 4G 3G 2G GSM GPRS GNSS HAT Based on SIM7600G-H LTE CAT4 150Mbps Wireless Communication Telephone...
5 Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V
6 EC Buying SIM800C USB to GSM Module Quad-Band GSM/GPRS Wireless Module Integrated USB to Serial Chip... EC Buying SIM800C USB to GSM Module Quad-Band GSM/GPRS Wireless Module Integrated USB to Serial...
7 EIOTCLUB Prepaid 4G LTE Cellular SIM Card - No Contract Wireless - USA Compatible with AT&T and... EIOTCLUB Prepaid 4G LTE Cellular SIM Card - No Contract Wireless - USA Compatible with AT&T and...
8 ELEGOO UNO R3 Board ATmega328P with USB Cable(Arduino-Compatible) for Arduino ELEGOO UNO R3 Board ATmega328P with USB Cable(Arduino-Compatible) for Arduino
9 Screw Terminal Block Breakout Shield Module for Arduino UNO R3 Screw Terminal Block Breakout Shield Module for Arduino UNO R3
10 HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for... HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for...
11 HiLetgo 3pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple... HiLetgo 3pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple...
12 Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion for... Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion...
13 Seeed Studio Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040... Seeed Studio Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040...
14 LILYGO Solar Charge Development Board Module ESP32-WROVER-B Chip Wireless Module WiFi BLE 18560... LILYGO Solar Charge Development Board Module ESP32-WROVER-B Chip Wireless Module WiFi BLE 18560...
15 ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
16 LILYGO ESP32 T-Display Module for Arduino Development Board TTGO LCD Wi-Fi BLE CH9102F Chip LILYGO ESP32 T-Display Module for Arduino Development Board TTGO LCD Wi-Fi BLE CH9102F Chip
17 MakerFocus ESP32 LoRa 32 (V2), ESP32 Development Board W I F I Bluet ooth LoRa Dual Core 240MHz... MakerFocus ESP32 LoRa 32 (V2), ESP32 Development Board W I F I Bluet ooth LoRa Dual Core 240MHz...
18 LILYGO TTGO T-Relay ESP32 Wireless Module DC 5V 4 Groups Relay Development Board 4MB Flash WiFi BLE... LILYGO TTGO T-Relay ESP32 Wireless Module DC 5V 4 Groups Relay Development Board 4MB Flash WiFi...
19 Electronics-Salon Arduino Screw Terminal Block Breakout Module, for Arduino UNO R3. Electronics-Salon Arduino Screw Terminal Block Breakout Module, for Arduino UNO R3.
20 ElectroCookie Uno Terminal Block Shield Kit, Compatible for Arduino Uno R3, Push-in Simple Spring... ElectroCookie Uno Terminal Block Shield Kit, Compatible for Arduino Uno R3, Push-in Simple Spring...
Bestseller No. 1
Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)
  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions
Bestseller No. 2
HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot...
  • Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote...
  • The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode.
  • It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands.
  • AT command interface with "auto baud" detection.
  • TTL serial port for serial port, you can link directly to the microcontroller
Bestseller No. 3
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/WH and Jetson...
  • The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is...
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Breakout UART control pins, to connect with host...
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning. Onboard...
  • SIM card slot, supports 1.8V/3V SIM card. TF card slot for storing data like files, messages, etc. Onboard audio jack and audio decoder for making...
Bestseller No. 4
4G 3G 2G GSM GPRS GNSS HAT Based on SIM7600G-H LTE CAT4 150Mbps Wireless Communication Telephone...
  • Part Number: SIM7600G-H 4G HAT
  • 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600G-H
  • The SIM7600G-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is...
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection,...
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Bestseller No. 5
Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V
  • Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply...
  • Computer debugging USB--TTL. This module is powered by: 5V-26V, 5V 2A power supply is recommended. After plugging in the motherboard, the power supply...
  • The other power supply port leads to the 3.7--4.5V power supply for lithium battery power supply. The serial port is perfectly compatible. The TTL...
  • Make sure your SIM card is not locked. The best baud rate for GPRS Shield communication is 19200 BPS 8-n-1 (GPRS Shield automatically matches baud...
  • GPRS multi-slot class 10/8. GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz). Class 1 (1 W @ 1800 / 1900MHz)....
Bestseller No. 6
EC Buying SIM800C USB to GSM Module Quad-Band GSM/GPRS Wireless Module Integrated USB to Serial Chip...
  • ◇Introduction: USB to GSM is a four-frequency GSM/GPRS module, its stable performance, and can meet a variety of customer needs. Integrated USB to...
  • ◇ On-board original SIM800C GSM/GPRS module; On-board CH340T USB to serial port chip, simple driver installation and high compatibility;...
  • ◇The USB to GSM module will automatically start up and connect to the network when it is powered on. It does not need to control the startup with...
  • ◇Support SMS sending and receiving, provide management software; provide reference host computer source code (c#, vb) supporting materials and...
  • ◇Support Bluetooth data transmission, IEEE802.15 bluetooth standard, 2.4GHz working frequency band; support adaptive baud rate; with working...
Bestseller No. 7
EIOTCLUB Prepaid 4G LTE Cellular SIM Card - No Contract Wireless - USA Compatible with AT&T and...
  • ☆ Great Data Service Solution - Our SIM card offers 300MB data for 30 days of wireless service for No Cost. Join and enjoy this service right now....
  • ☆ How It Works - Just insert the SIM card to your device Without Activation and that’s it. Our service will work within the USA through AT&T and...
  • ☆ Safe and Reliable - No Contracts. No extra fees. No hidden fees. No activation fees. During the use process you simply fill in the correct email...
  • ☆ Compatible and Convenient Data Service - Our SIM cards have been tested are a great choice for a variety of IoT devices, such as mobile phones,...
  • ☆ Online Support Provided - We will provide professional online ordering and online customer support to solve issues you encounter. Your...
SaleBestseller No. 8
ELEGOO UNO R3 Board ATmega328P with USB Cable(Arduino-Compatible) for Arduino
  • Clear prints on the female header connector, more precise and easier to use the wire.
  • The ELEGOO UNO R3 BOARD now uses an 16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
  • Control using ATMEL ATMEGA+328P chip(the same with Arduino UNO R3)
  • 100% compatible with the Arduino IDE and RoHS Compliant
  • We have always cared about the customer experience and improve the product function details.
Bestseller No. 9
Screw Terminal Block Breakout Shield Module for Arduino UNO R3
  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled.
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers.
  • NOTE: the item not include Arduino Uno module.
Bestseller No. 10
HiLetgo 3pcs RFID Kit - Mifare RC522 RF IC Card Sensor Module + S50 Blank Card + Key Ring for...
  • The MF522-AN module design the circuit of card read by using the original Philips MFRC522 chip.
  • Easy to use, low cost, and applicable to equipment development and card reader development etc.
  • Applicable for the user who need to design or manufacture the RF card terminal.
  • The module can be directly loaded into the various reader molds.
  • The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure...
Bestseller No. 12
Treedix 2pcs Level Shifting MicroSD Breakout Board with SPI Interface Onboard Level Conversion for...
  • This is a small micro SD breakout board
  • The module has built-in level adjustment circuit, which can realize level conversion between 5V and 3.3V microSD
  • Communication interface: standard SPI; the interface voltage is 3.3V or 5V
  • Applicable card type: Micro SD Card
  • Hardware connection: This microsd card is equipped with a level converter, which can not only connect 5v devices other than arduino, but also prevent...
SaleBestseller No. 13
Seeed Studio Raspberry Pi Pico Flexible Microcontroller Board Based on The Raspberry Pi RP2040...
  • Notice: We only provide after-sales service purchased from Seeed Studio
  • đŸŒ±ă€High-Performance CPU】Raspberry Pi Pico features Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz. With 264KB of SRAM,...
  • đŸŒ±ă€Multiple Software Support】Pico has rich and complete software support, it comes with a complete Rasberry Pi official C/C++ SDK, Micropython...
  • đŸŒ±ă€Rich Hardware Interface】Raspberry Pi Pico has 26 × multi-function GPIO pins, 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 ×...
  • đŸŒ±ă€Build Project in Tiny Size】Only 2.1cm*5.1cm ( as small as your thumb). Pico has been designed to use either soldered 0.1" pin-headers or can...
SaleBestseller No. 14
LILYGO Solar Charge Development Board Module ESP32-WROVER-B Chip Wireless Module WiFi BLE 18560...
  • 16MB Flash and 8M PSRAM
  • WIFI: 802.11 b/g/n , Blutooth : v4.2 BR/EDR and BLE
  • Peripheral Interfaces: I2C , SPI , UART , SDIO , I2S , CAN
  • More informationgithub.com/Xinyuan-LilyGO/LilyGO-T-SIM7000G
  • If you have any questions about our products, please feel free to contact us
Bestseller No. 15
ELEGOO UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE
  • Free PDF tutorial(more than 22 lessons) and clear listing in a nice package
  • The most economical kit based on Arduino platform to starting learning electronics for those beginners who are interested.
  • Lcd1602 module with pin header (not need to be soldered by yourself)
  • This is the upgraded starter kits with power supply module, 9V battery with dc
  • High quality kit with UNO board, compatible with Arduino UNO R3, MEGA 2560 R3, NANO.
Bestseller No. 16
LILYGO ESP32 T-Display Module for Arduino Development Board TTGO LCD Wi-Fi BLE CH9102F Chip
  • Chipset: ESPRESSIF-ESP32 (Wi-Fi & Bluetooth compatible)
  • FLASH: 16MB
  • Display: IPS ST7789V 1.14 Inch , USB: Type-C
  • Working current: About 67MA , Sleep current: About 350uA
  • github[dot]com/Xinyuan-LilyGO/TTGO-T-Display
Bestseller No. 17
MakerFocus ESP32 LoRa 32 (V2), ESP32 Development Board W I F I Bluet ooth LoRa Dual Core 240MHz...
  • ★ Documents: Please get the link from the product description below
  • ★Note: This item comes unassembled, soldering of headers is required.
  • ★Upgrade ESP32 lora development board with 868/915MHz antenna, it supports Sniffer, Station, softAP and W i- F i Direct modes. If you want to use...
  • ★High reliability, transmission distance (measured open area communication distance 2.8Km); Receiver sensitivity up to - 139 dBm, UDP continues to...
  • ★Board friendly, space of pins is 2.54*23mm, fit to breadboard. 0.96-inch blue esp32 oled display, lithium battery charging circuit and interface,...
Bestseller No. 18
LILYGO TTGO T-Relay ESP32 Wireless Module DC 5V 4 Groups Relay Development Board 4MB Flash WiFi BLE...
  • -4MB FLASH ,8MB PS RAM
  • -MCU: ESP32-Wrover-B
  • -WIFI :802.11 b/g/nBlutoothBLE V4.2
  • -Onboard Functions :4 Groups of relays ,Optocoupler Isolation, 16 Expansion GPIO
  • -More information: github.com/Xinyuan-LilyGO/LilyGo-T-Relay
Bestseller No. 19
Electronics-Salon Arduino Screw Terminal Block Breakout Module, for Arduino UNO R3.
  • Terminal Block Breakout Module - for Arduino UNO R3. the item has been soldered and assembled.
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment.
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers.
  • NOTE: the item not include Arduino Uno module
SaleBestseller No. 20
ElectroCookie Uno Terminal Block Shield Kit, Compatible for Arduino Uno R3, Push-in Simple Spring...
  • Useful for Arduino Uno Installation Projects Using GPIO pins
  • Simple Push-in Type Terminal Block Breakout Shield for Arduino Uno
  • Offered with 20pin Ribbon Cable(2feet, 60cm), Standoffs, Mounting Screws, and Screw Driver
  • The terminal board is soldered, assembled and ready-to-use
  • NOTE: The package does not include Arduino Uno

Having trouble finding a great Arduino Gsm Shield 4g?

This problem is well understood by us because we have gone through the entire Arduino Gsm Shield 4g research process ourselves, which is why we have put together a comprehensive list of the best Arduino Gsm Shield 4gs available in the market today.

After hours of searching and using all the models on the market, we have found the best Arduino Gsm Shield 4g for 2023. See our ranking below!

How Do You Buy The Best Arduino Gsm Shield 4g?

Do you get stressed out thinking about shopping for a great Arduino Gsm Shield 4g? Do doubts keep creeping into your mind?

We understand, because we’ve already gone through the whole process of researching Arduino Gsm Shield 4g, which is why we have assembled a comprehensive list of the greatest Arduino Gsm Shield 4g available in the current market. We’ve also come up with a list of questions that you probably have yourself.

John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Arduino Gsm Shield 4g that you consider buying. Your questions might include the following:

  • Is it worth buying an Arduino Gsm Shield 4g?
  • What benefits are there with buying an Arduino Gsm Shield 4g?
  • What factors deserve consideration when shopping for an effective Arduino Gsm Shield 4g?
  • Why is it crucial to invest in any Arduino Gsm Shield 4g, much less the best one?
  • Which Arduino Gsm Shield 4g are good in the current market?
  • Where can you find information like this about Arduino Gsm Shield 4g?

We’re convinced that you likely have far more questions than just these regarding Arduino Gsm Shield 4g, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Arduino Gsm Shield 4g, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Arduino Gsm Shield 4g. Make sure that you are only using trustworthy and credible websites and sources.

John Harvards provides an Arduino Gsm Shield 4g buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.

How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Arduino Gsm Shield 4g currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Arduino Gsm Shield 4g has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Arduino Gsm Shield 4g?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Arduino Gsm Shield 4g.
  5. Customer Ratings: Number ratings grade Arduino Gsm Shield 4g objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Arduino Gsm Shield 4g.
  7. Product Quality: You don’t always get what you pay for with an Arduino Gsm Shield 4g, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Arduino Gsm Shield 4g is should be an indication of how long it will work out for you.

John Harvards always remembers that maintaining Arduino Gsm Shield 4g information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Arduino Gsm Shield 4g is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Related Post:

FAQ:

Q: What is the 4G Shield for Arduino?

A: The new 4G shield for Arduino enables the connectivity to high speed LTE, HSPA+, WCDMA cellular networks in order to make possible the creation of the next level of worldwide interactivity projects inside the new “Internet of Things” era. The module comes with 3 waterproof IP67 SMA pigtails perfect for ourtdoor projects.

Q: Is the sim7600ce-t 4G (LTE) shield compatible with Arduino?

A: This shield is as small as a credit card and compatible with controller boards like Arduino UNO, arduino Leonardo, arduino Mega etc. The frequency bands that SIM7600CE-T 4G (LTE) Shield supports are LTE-TDD/ LTE-FDD/HSPA+/TD-SCDMA/EVDO and GSM/GPRS/EDGE.

Q: What is the Arduino GSM Shield 2?

A: The Arduino GSM Shield 2 allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The shield uses a radio modem M10 by Quectel. It is possible to communicate with the board using AT commands. The GSM library has a large number of methods for communication with the shield.

Q: Is there a shield that takes a 4G LTE SIM card?

A: Is there by any chance a shield that can take an 4G LTE compatible SIM card activated by a carrier and establish a connection? Show activity on this post. Googling “4g shield arduino” gave this. It will need a 4G LTE capable SIM, but I guess “it depends” if any 4G LTE SIM will work..