20 Best 16 Relay Module Datasheet [2022]

Are you looking for the best 16 Relay Module Datasheet? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling 16 Relay Module Datasheet.

We Recommended:

# Preview Product
1 DIN Rail Mount 16 SPDT 10Amp Power Relay Interface Module (DC 5V) DIN Rail Mount 16 SPDT 10Amp Power Relay Interface Module (DC 5V)
2 HiLetgo 12V 1 Channel Relay Module With Optocoupler Isolation Support High or Low Level Trigger HiLetgo 12V 1 Channel Relay Module With Optocoupler Isolation Support High or Low Level Trigger
3 KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi... KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry...
4 16 Channel Relay Board Relay Module with Optocoupler Protection Low Level Trigger Low level 12V 16 Channel Relay Board Relay Module with Optocoupler Protection Low Level Trigger Low level 12V
5 HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level... HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level...
6 HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
7 25 Pack 40/30 AMP 5 Pin SPDT 12V DC Bosch Style Relay Switch for Electrical Automotive Truck Marine... 25 Pack 40/30 AMP 5 Pin SPDT 12V DC Bosch Style Relay Switch for Electrical Automotive Truck...
8 5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN... 5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires,...
9 ACEIRMC 5V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit... ACEIRMC 5V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY...
10 HiLetgo 2pcs DC 24V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level... HiLetgo 2pcs DC 24V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level...
11 HiLetgo 2pcs 12V Single Bistable Self-Locking Relay Module Push to Start and Stop HiLetgo 2pcs 12V Single Bistable Self-Locking Relay Module Push to Start and Stop
12 SainSmart 8-Channel 5V Solid State Relay Module Board for Arduino Uno Duemilanove MEGA2560 MEGA1280... SainSmart 8-Channel 5V Solid State Relay Module Board for Arduino Uno Duemilanove MEGA2560...
13 HiLetgo 2pcs DC 24V 1 Channel Relay Module with OPTO Isolation Support High or Low Level Triggle HiLetgo 2pcs DC 24V 1 Channel Relay Module with OPTO Isolation Support High or Low Level Triggle
14 1 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN... 1 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires,...
15 DC 5V-36V Timer Module Trigger Cycle Delay Timer Switch Turn On/Off Relay Module with LED Display DC 5V-36V Timer Module Trigger Cycle Delay Timer Switch Turn On/Off Relay Module with LED Display
16 3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT... 3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for...
17 Electronics-Salon 6PCS 3VDC SPST-NO 5A/250V Power Relay Module. DC3V. Electronics-Salon 6PCS 3VDC SPST-NO 5A/250V Power Relay Module. DC3V.
18 12V Auto Waterproof Fuse Relay Box Block [6 Bosch Style Relay Holder] [6 ATC/ATO Fuse Holder]... 12V Auto Waterproof Fuse Relay Box Block [6 Bosch Style Relay Holder] [6 ATC/ATO Fuse Holder]...
19 Songhe DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board... Songhe DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control...
Bestseller No. 1
DIN Rail Mount 16 SPDT 10Amp Power Relay Interface Module (DC 5V)
  • 16 Channel SPDT power relay interface module, high quality JS1-5V-F 10Amp relays.
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel.
  • High quality screw terminal block, FR-4 fiber glass PCB, dual copper layers.
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the...
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1SCgm+XiRL.pdf
Bestseller No. 2
HiLetgo 12V 1 Channel Relay Module With Optocoupler Isolation Support High or Low Level Trigger
  • Module uses genuine high quality relay, normally open interface maximum load: AC 250V / 10A, DC 30V / 10A
  • Using optocoupler chip isolation, strong drive capability, stable performance; trigger current 5mA
  • Module can be set by jumper high or low trigger
  • Fault-tolerant design, even if the control line is broken, the relay will not move
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient
Bestseller No. 3
KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi...
  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not...
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without...
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be...
  • Packed well in nice box, also each item packed well separately.
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more.
Bestseller No. 4
16 Channel Relay Board Relay Module with Optocoupler Protection Low Level Trigger Low level 12V
  • Contact capacity 10A 250 V with optocoupler protection. The port controller I / O is active low.
  • Each common relay is independent and easy to use to access different signals, with port normally closed/open and an action indicator.
  • Can be used as MCU development board module, appliance control, extended output, etc.
  • The on-board power module does not require an external power supply. With excellent industry optocoupler isolation anti-interference performance and...
  • User-friendly interface design, all interfaces can be drawn directly through the wiring terminal, very convenient.
Bestseller No. 5
HiLetgo 2pcs DC 12V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level...
  • Can set high or low level trigger with jumper, to meet the demand of more trigger applications;
  • With patch optical isolation, strong drive ability and stable performance;
  • The module can be high or low by a jumper setting trigger;
  • Interface design humane, all interfaces can be connected directly via terminal wiring leads , very convenient ;
  • Fault-tolerant design , even if the control line is broken , the relay will not operate ;
Bestseller No. 6
HiLetgo 2pcs 5V One Channel Relay Module Relay Switch with OPTO Isolation High Low Level Trigger
  • The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
  • Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
  • Fault-tolerant design, even if the control line is broken, the relay will not move.
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
  • The Module can be set by jumper high or low trigger.
Bestseller No. 7
25 Pack 40/30 AMP 5 Pin SPDT 12V DC Bosch Style Relay Switch for Electrical Automotive Truck Marine...
  • 40A / 30A high switching capability
  • Bosch style 5-prongs universal relay, SPDT (Single Pole Double Throw)
  • Pin Specifications: 30-VDC, 85-Ground, 86-Trigger, 87-Output N/O, 87a-Output N/C
  • Nominal Coil Voltage: 12 V DC; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC; Coil Power: 1.8...
  • Wide Application: All automotive and devices equipped with a 12 Volt DC power source (car sound systems, security systems, and various other...
Bestseller No. 8
5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN...
  • Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
  • 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
  • Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
  • Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
  • Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum...
Bestseller No. 9
ACEIRMC 5V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit...
  • 5V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current
  • Equipped with high-current relay, AC250V 10A ; DC30V 12A
  • The control signal voltage range: the trigger signal is low 0-2V; high voltage must not exceed 5V.
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic)
  • DC 5V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit
Bestseller No. 10
HiLetgo 2pcs DC 24V 2 Channel Relay Module with Isolated Optocoupler High and Low Level H/L Level...
  • SMD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
  • User-friendly interface design, all interfaces are available through the wiring terminal direct connection leads, very convenient.
  • MD optocoupler isolation, driving ability, stable performance; trigger current 5mA;
  • Authentic quality module 30A relay, normally open interfaces Maximum load: AC 250V / 30A, DC 30V / 30A;
Bestseller No. 12
SainSmart 8-Channel 5V Solid State Relay Module Board for Arduino Uno Duemilanove MEGA2560 MEGA1280...
  • Has been assembled, and electrical test passed.
  • Led indicator for each relay.
  • FR-4 Fiber glass PCB (Double Layer); Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch)
  • Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON); SSR Output (each...
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
Bestseller No. 13
HiLetgo 2pcs DC 24V 1 Channel Relay Module with OPTO Isolation Support High or Low Level Triggle
  • The module uses genuine quality relay, normally open interfaces , Maximum load: AC 250V/10A, DC 30V/10A.
  • Using SMD optocoupler isolation, strong driving capability, stable performance; trigger current 5mA.
  • Fault-tolerant design, even if the control line is broken, the relay will not move.
  • The interface design of human nature, all interfaces are available through a direct connection terminal leads, very convenient.
  • The Module can be set by jumper high or low trigger.
Bestseller No. 14
1 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN...
  • Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
  • 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
  • Be careful when plugging the relay into the socket. If you push hard, you will bend the female connector
  • Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
  • SPDT relay: it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to...
Bestseller No. 15
DC 5V-36V Timer Module Trigger Cycle Delay Timer Switch Turn On/Off Relay Module with LED Display
  • 【High performance 】Compared to normal electromagnetic relay modules, it has a longer service life.High performance control chip for high stability...
  • 【widely used】Dual-MOS in parallel active output, lower inner resistance, larger current, strong power; at room temperature, operating current is...
  • 【No noise 】No noise was made during turning on/off, no spark, and no electromagnetic interference
  • 【Switch multiple times 】To achieve fast high frequency turn-on and off circuit, an unlimited number of switching times
  • 【very convenient】Wide voltage input from 5V to 36V, normally used for controlling DC motors, lights, LED strips, micro-pumps, solenoid valves,...
Bestseller No. 16
3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT...
  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller...
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole.
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high...
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is...
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266...
Bestseller No. 17
Electronics-Salon 6PCS 3VDC SPST-NO 5A/250V Power Relay Module. DC3V.
  • Quantity: Pack of 6 pieces.
  • High-quality JV 3S-KT relay, FR-4 fiberglass PCB, 1N4148 freewheeling diode, all has been soldered and test passed.
  • Input control singal: 3VDC / 100mA, Outupt switch Contact rating: 5A/250VAC or 5A/30VDC.
  • Switch configuration: 1 form A (SPST-NO).
  • Other, the input and output no terminal block, if you want use terminal block to connect wires, you can mount pitch 5.0 / 5.08mm standard terminal...
Bestseller No. 18
12V Auto Waterproof Fuse Relay Box Block [6 Bosch Style Relay Holder] [6 ATC/ATO Fuse Holder]...
  • REMAP YOUR WIRING - organize, consolidate, and keep track of multiple independent circuits with six relay sockets and six fuse holders.
  • MULTI-TRERRAIN - Our unique "Z" shaped brackets make it possible to securely mount this waterproof relay box just about anywhere.
  • BUILT LIKE A TANK - Made from durable and dependable nylon 66 and sporting an IP65 waterproof rating, our relay box dosent understand the word...
  • A COMPLETE KIT - Box, brackets, seals, terminals, we've included everything you will need to sucessfully install your new waterproof relay box.
  • MORE THAN A WARRANTY - We've got you covered with an industry leading two-year warranty and the best customer support in the business.
Bestseller No. 19
Songhe DC 1 Channel Optocoupler 3V/3.3V Relay High Level Driver Module Isolated Drive Control Board...
  • Links to regular customers with discounts, only 100 in stock
  • Optocoupler Isolator:3V/3.3V power relay module supports photocoupler isolation control.
  • 30VDC 250VAC Load:The power switch is compatible with 10A 250VAC and 10A 30VDC load.

Having trouble finding a great 16 Relay Module Datasheet?

This problem is well understood by us because we have gone through the entire 16 Relay Module Datasheet research process ourselves, which is why we have put together a comprehensive list of the best 16 Relay Module Datasheets available in the market today.

After hours of searching and using all the models on the market, we have found the best 16 Relay Module Datasheet for 2022. See our ranking below!

How Do You Buy The Best 16 Relay Module Datasheet?

Do you get stressed out thinking about shopping for a great 16 Relay Module Datasheet? Do doubts keep creeping into your mind?

We understand, because we’ve already gone through the whole process of researching 16 Relay Module Datasheet, which is why we have assembled a comprehensive list of the greatest 16 Relay Module Datasheet available in the current market. We’ve also come up with a list of questions that you probably have yourself.

John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 16 Relay Module Datasheet that you consider buying. Your questions might include the following:

  • Is it worth buying an 16 Relay Module Datasheet?
  • What benefits are there with buying an 16 Relay Module Datasheet?
  • What factors deserve consideration when shopping for an effective 16 Relay Module Datasheet?
  • Why is it crucial to invest in any 16 Relay Module Datasheet, much less the best one?
  • Which 16 Relay Module Datasheet are good in the current market?
  • Where can you find information like this about 16 Relay Module Datasheet?

We’re convinced that you likely have far more questions than just these regarding 16 Relay Module Datasheet, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 16 Relay Module Datasheet, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 16 Relay Module Datasheet. Make sure that you are only using trustworthy and credible websites and sources.

John Harvards provides an 16 Relay Module Datasheet buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.

How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 16 Relay Module Datasheet currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 16 Relay Module Datasheet has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 16 Relay Module Datasheet?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 16 Relay Module Datasheet.
  5. Customer Ratings: Number ratings grade 16 Relay Module Datasheet objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 16 Relay Module Datasheet.
  7. Product Quality: You don’t always get what you pay for with an 16 Relay Module Datasheet, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 16 Relay Module Datasheet is should be an indication of how long it will work out for you.

John Harvards always remembers that maintaining 16 Relay Module Datasheet information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 16 Relay Module Datasheet is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Related Post:

FAQ:

Q: How many channels are there in 16 channel relay module?

A: SPECIFICATION Product Name: 16-Channel Relay Module Number of Channels: 16 di Control Signal voltage: 5V, active low Load Voltage: AC 250V/10A, AC 125V/15A DC 30V 10A Input power: 12V Each board needs 15-20mA Driver Current I / O port driver is active in low level. 1-16 channel optionally fully open/closed, or any channel.

Q: What is a 16-channel relay interface board?

A: INTRODUCTION In order to meet the customer’s demand for the control of the switching device, the UCTRONICS team now releases a 16-channel relay module which allows a small level signal to control any normal outlet or high voltage This is a 12V 16-Channel Relay interface board, be able to control any electric appliances rated at under 2000 Watts.

Q: How many relays can be connected to a single RPI?

A: An SPI bus port expander could also be used (MPC23S17 or MPC23S08) with the Rpi. Utilizing both I2C buses on the RPI, that means that a total of 256 relays can be connected to the Rpi. In addition another 256 relays can be connected via the SPI bus. for a grand total of 512 relays controlled by a single Rpi.

Q: What is a 1769-ow16 module?

A: Module Description The 1769-OW16 is a 16 point relay output module that can control AC or DC loads. The module has 2 isolated groups of 8 points each. This allows you to mix both AC and DC loads on one module.