Are you looking for the best 12v To 3.3v Regulator? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling 12v To 3.3v Regulator.
We Recommended:
- AMS1117-3.3 is a positive Voltage Regulator Step Down Power Supply Module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The module is suitable for electronic devices such as SCM project design needs 5V power supply, It is simple Dual-panel design and the Input output...
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: Arduino UNO MEGA2560; MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9...
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection.
- AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The voltage regulator converter module is suitable for electronic devices, with the design of 3 pins, this buck converter is easy to connect your MCU...
- Applicable for high-efficiency linear regulator Published Active Power Regulator Battery Charger Active instrument.
- Applications: MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11 STM32; etc.
- AMS1117 overheat shutdown circuit provides overload and over-temperature protection. AMS1117-3.3V Buck Converter soldering kit only supports...
- AMS1117-3.3V power module 3-pin blue board buck converter.
- The AMS1117-3.3 step-down converter step-down module supports DC 4.75-12V input and 3.3V fixed voltage and 800mA current output.
- With a 3-pin design, this step-down converter can be easily connected to your MCU development and provide a constant power supply.
- Input voltage: DC 4.2 V-10 V. Output: 3.3 V, 800 mA.
- The thermal shutdown circuit of the buck converter provides overload and thermal protection to prevent effective damage to the equipment.
- AMS1117-3.3 is a positive voltage regulator buck power supply module that supports 4.75-12V DC input, 3.3V fixed voltage and 0.8A current output...
- AMS1117-3.3 effective protection: The overheat shutdown circuit of the buck converter provides overload and overheat protection to avoid effective...
- Our DC voltage regulator measures only 8.6mm * 12.3mm, which is easy to use and install; it is a simple dual-panel design, and the input and output...
- The AMS1117-3.3 pin can be easily connected to your MCU development and provide a constant power supply.
- Wide application of DC buck converter: Arduino UNO MEGA2560, MSP430 development card, 3.3V low power MCU, FPGA/CPLD PLD programmable logic system,...
- RED WOLF Voltage Step Down Switcher Harness work as input 12V-14V but finally output 3.3V 5V 6V to meet your car devices install need. Won't work for...
- Total 4 kinds of output voltage are available. There are 3 voltage slot representing 3.3V 5V 6V power. It can be switch to your desired voltage...
- The DC-DC converter is widely used in Vehicles electronic systems. Such as to power factory camera or to Remove Popping noise for Ford Mustang Lincoln...
- Made of professional electrical level copper wire materials, Strong conductivity. Prevent Car equipment from damage due to over voltage,...
- Easy installation. Only 4 wires are need to be connected. Diagram is include in the package. Input voltage range DC12V-DC14V. Output DC 12V to 3.3V,...
- DROK voltage regulator input voltage range is DC 4.5-24V, adjustable range is 0.8-17V, fixed output are 1.8V, 2.5V, 3.3V, 5V, 9V, 12V that can be...
- Output integrated adjustable and fixed voltage, you can get fixed output voltage by soldering the pot on the board. If the fixed output voltage is not...
- High efficiency and super compact size, high frequency and low ripple, stable working performance, wide range of applications, this 12v to 5v...
- Strong and high quality construction: imported potentiometer and 3A current chip, high current shielded inductors and MLCC solid capacitance with long...
- Integrated enable port defaults the working mode and it will be off when it is at low electric level off, which bring a great convenience for users....
- Mini 3A DC-DC Step-down power module, suitable for aviation model power supply, DIY mobile power supply, monitoring power supply, four-wheel-drive...
- Wide Input Voltage Range: 4.5V to 28V, can be used as voltage regulator 24V/12V/9V to 12V/5V/3.3V etc.
- Output Voltage: 0.8V to 20V adjustable, 3A (max), Transfer Efficiency up to 96%.
- Working Temperature: -45 to 85 degrees Celsius, Size: 22x17x4mm. Be well-suited for all kinds of occasions with strict requirements for volume and...
- Note: Be careful not to reverse the positive and negative terminals to avoid any possible damage.
- This is Hall Effect magnetic sensor module DC 5V for Arduino
- Small size and high sensitivity. Fast response temperature and good performance. Precision and high reliability
- 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor integrated circuit, which is determined by the...
- Hall voltage generator, differential amplifier, Schmidt trigger, temperature compensation circuit and the collector electrode open circuit output...
- This section circuit pipe legs with pure tin production, the complete model is 3144EUA-S or 3144LUA-S.
- Input Voltage: DC 6.5-36V, Output Voltage: DC 1.2-32V, Output Current: 0-4.5A (3.5A for long time work in natural heat dissipation). Max output power:...
- LCD: Can display input/output voltage, output current and output power; Voltage Display Resolution 0.05V, Current Display Resolution 0.005A.
- IN/OUT button for switching LCD display; ON/OFF button for switching or setting output status switch; +/- button for regulating output voltage, short...
- Safety Protection: With input reverse protection, short circuit protection. If charge the battery, charge the module first and then connect the...
- Can be used as common step-down power module with over-current protection, battery charger, large power LED constant current drive module etc.
- 100% brand new and high quality USB interface Multifunction DC/DC 5V to 3.3V Buck Module Input DC 4.5-7V(USB input OR 2.54 Pin input)
- Output: 3.3 V,800 mA (load current can't more than 800 mA)
- 3 functions : USB to 3.3V;USB to 5V(5V to 5V);5V to 3.3V
- Application: for raspberry pi/banana pi/esp8266, for MEGA2560 DUE, for AVR Atmel PIC STM32 C8051 MSP430 Zigbee CC2530
- Wireless module : Nrf24l01 Nrf24lE1 CC1101 CC2500 SI4432 SI4463, for FPGA/CPLD:Altera EPM240/EPM570/EP4CE6; Xilinx XC2C64A,Wireless communication...
- Input Voltage: DC: 4 - 40V; Output Voltage: 1.25V - 37V; Output current: 3A MAX(2A Stable); Output power: 20W
- Onboard voltmeter, which can be self-calibrated.
- The voltmeter error is ± 0.05V, and the range is 0 ~ 40V. (To ensure the accuracy of the voltmeter, please ensure that the input voltage is above...
- With wiring terminals, it can be used conveniently without soldering iron, and the solder wire connection point is reserved.
- This module can be used in the reduced-voltage field where the input voltage is higher than the output voltage, such as batteries, power transformers,...
- Input voltage 3-6V, output 12V
- Maximum input current:1.2A;Long-term work Current : IA;1.2A current limiting resistor,Remove the resistance, the maximum input current can reach 2A.
- But IC have "Over Temperature Protection" Function.It will turn off the power MOSFET automatically when the internal junction temperature is over 150...
- Conversion efficiency:80-90%;DC-DC Boost module working frequency 1.0MHZ.
- 2.54mm pin pitch,Arduiuo UNO DUE Breadboard FPGA / CPLD Development Board friendly.
- AMS1117-3.3 is a positive Voltage Regulator Step Down Power Supply Module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
- The Voltage Regulator module can be used for electronic devices, such as SCM project design needs 3.3V power supply, it is simple Dual-panel design...
- AMS1117-3.3V Step down Module pinout can be easy to connected with your MCU development and provide the constant power supply.
- Application: Arduino UNO MEGA2560; MSP430 Development Board; 3.3V Low power consumption MCU; FPGA/CPLD PLD Programmable Logic Systems; ARM7 ARM9 ARM11...
- Attention: AMS1117-3.3V Buck Voltage module soldering kit only support 3.3V,800mA output, So the load current cannot exceed 800mA.
- Precise Calibration:this power supply module display with voltage, USB adjustable buck boost power supply module 3.5-12V to 1-24V
- Output: plug in USB or micro USB can easily output adjustable voltage from 1V to 24V and the power is 3W
- Adjustable voltage: adopt multi-turn precision adjustable potentiometer to adjust voltage.
- Data storage: automatically save the state before the power failure, the output data will not be lost.
- One key to turn off the output, and store the state before power off, no worry about data loss
- ★Input: DC 3-40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
- ★Output: DC 1.5-35 V voltage is continuously adjustable, maximum output current is 3 A.
- ★Easy work: convenient to accurately adjust the output voltage with a mini screwdriver.
- ★Features: Thickened circuit boards,Short circuit and over-temperature protection.
- ★Application: widely used for DIY mobile power, monitor power supply, power buggies,communications equipment supply,etc.
- Mini MP1584EN DC to DC buck converter module with a wide operating range
- Input voltage: 4.5 V to 28 V; Output voltage: 0.8 V to 20 V
- Output current: 3 A (maximum); Conversion efficiency: 92% (maximum)
- Output ripple: less than 30 mV; Switching frequency: 1.5 MHz (highest), typically 1 MHz
- Operating temperature: -45 ℃ to 85 ℃; Size: 22 mm by 17 mm by 4 mm; Warning: do not reverse the positive and negative terminals to avoid...
- Specifications: power input: DC 4.5 - 24V, adjustable range: 0.8 - 17V; Fixed output: 1.8V, 2.5V, 3.3V, 5V, 9V, 12V (can be chosen on the back); Max...
- High efficiency: the voltage regulator module has high efficiency, ultra-compact size, high frequency, low ripple and stable working performance,...
- Adjustable and fixed voltage output: you can get fixed output voltage by soldering the pot on the board of regulator module; You can also adjust the...
- Quality material: our buck converter is made with quality potentiometer and 3A current chip, high current shielding inductor and MLCC solid capacitor...
- Simple to operate: integrated design allows port of the regulator board defaults to keep working mode and will be closed if it is at low electric...
- PARAMETER --- Input voltage range DC 6V-32V; Output voltage DC 1.5V-32V; Max output current 5A, recommend use of within 4.5A; Max output power 75W,...
- GENERAL USE --- As ordinary step-down module with over-current protection; As constant current LED driver module; DIY a solar power controller, etc.
- DISPLAY --- Large clear digital LCD display voltage & current value simultaneously.
- FEATURES --- Constant current/voltage mode; Voltage calibration & current calibration; USB interface; Protective case; Short-circuit protection;...
- NOTE --- 1). Output voltage is set as around 20V by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or...
- Input Voltage: 36V/48V (30-60VDC)
- Output Voltage: 12VDC;Output Current: 60A
- Over current protection, Over voltage protection, Over temperature shutdown
- Aluminium shell
- High efficiency up to 95%
Having trouble finding a great 12v To 3.3v Regulator?
This problem is well understood by us because we have gone through the entire 12v To 3.3v Regulator research process ourselves, which is why we have put together a comprehensive list of the best 12v To 3.3v Regulators available in the market today.
After hours of searching and using all the models on the market, we have found the best 12v To 3.3v Regulator for 2023. See our ranking below!
How Do You Buy The Best 12v To 3.3v Regulator?
Do you get stressed out thinking about shopping for a great 12v To 3.3v Regulator? Do doubts keep creeping into your mind?
We understand, because we’ve already gone through the whole process of researching 12v To 3.3v Regulator, which is why we have assembled a comprehensive list of the greatest 12v To 3.3v Regulator available in the current market. We’ve also come up with a list of questions that you probably have yourself.
John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 12v To 3.3v Regulator that you consider buying. Your questions might include the following:
- Is it worth buying an 12v To 3.3v Regulator?
- What benefits are there with buying an 12v To 3.3v Regulator?
- What factors deserve consideration when shopping for an effective 12v To 3.3v Regulator?
- Why is it crucial to invest in any 12v To 3.3v Regulator, much less the best one?
- Which 12v To 3.3v Regulator are good in the current market?
- Where can you find information like this about 12v To 3.3v Regulator?
We’re convinced that you likely have far more questions than just these regarding 12v To 3.3v Regulator, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for 12v To 3.3v Regulator, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 12v To 3.3v Regulator. Make sure that you are only using trustworthy and credible websites and sources.
John Harvards provides an 12v To 3.3v Regulator buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.
How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 12v To 3.3v Regulator currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of 12v To 3.3v Regulator has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an 12v To 3.3v Regulator?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your 12v To 3.3v Regulator.
- Customer Ratings: Number ratings grade 12v To 3.3v Regulator objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 12v To 3.3v Regulator.
- Product Quality: You don’t always get what you pay for with an 12v To 3.3v Regulator, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an 12v To 3.3v Regulator is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining 12v To 3.3v Regulator information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding 12v To 3.3v Regulator is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!
Related Post:
- Best Evga 80 Plus 600w Atx 12v Eps 12v Power Supply Black
- Best Adjustable Inline Air Regulator
- Best 2 Stage Regulator Propane
- Best Single Stage Gas Regulator
- Best Atomic B2 Regulator
- Best 2002 Pontiac Grand Prix Rear Window Regulator
- Best Co2 Tank To Argon Regulator Adapter
- Best External Voltage Regulator Ford
- Best Porter Cable 150 Psi Air Compressor Regulator
- Best Nissan Juke Window Regulator
FAQ:
Q: How to stepdown 12V to 3V using resistor?
A: Our task is to stepdown 12v into 3v. so, we are going to use 1k ohm resistor and 330-ohm resistor. Connect one end of 1K ohm resistor to 12v supply and second to any other hole of breadboard.
Q: What is a 12V divider circuit?
A: 12v battery x 1 multimeter x 1 A voltage divider is a simple circuit which turns a large voltage into a smaller one. Using just two series resistors and an input voltage, we can create an output voltage that is a fraction of the input.
Q: How do I connect a 1K ohm resistor to a 12V supply?
A: Connect one end of 1K ohm resistor to 12v supply and second to any other hole of breadboard. Frome same hole connects one end of 330-ohm resistance and another end to the ground.