10 Best Soft Close Toy Chest of 2021

Are you looking for the best soft close toy chest? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling soft close toy chest. Having trouble finding a great soft close toy chest? This problem is well understood by us because we have gone through the entire soft close toy chest research process ourselves, which is why we have put together a comprehensive list of the best soft close toy chests available in the market today. After hours of searching and using all the models on the market, we have found the best soft close toy chest for 2021. See our ranking below!

10 Best soft close toy chest: Recommended

 

10 Best Soft Close Toy Chest Reviews in 2021

Bestseller No. 1
SafeStay Lid Stay 105 Degree Open with Soft...
  • GENTLE SLOW CLOSE DESIGN - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
  • HOLDS LID OPEN - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
  • SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle.
  • EASY INSTALL INSTRUCTIONS - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
  • 100% MONEY-BACK GUARANTEE - If for whatever reason you are unhappy with the product we will refund you, no questions asked!
Bestseller No. 2
Lid Stay 105 Degree Open with Soft Close, Lid...
  • LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight 12-21 lbs, Height 18-19 inch. The hinge will not applicable with the lid at width more than 27’’ and height over 18’’.
  • LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
  • EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Bestseller No. 3
Morinbo Toy Box Hinges Soft Close, Lid Stay...
  • 🌟 GENTLE SLOW CLOSE DESIGN - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
  • 🌟 HOLDS LID OPEN - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
  • 🌟 SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle.
  • 🌟 EASY INSTALL INSTRUCTIONS - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
  • 🌟 100% MONEY-BACK GUARANTEE - If for whatever reason you are unhappy with the product we will refund you, no questions asked! If you have any concerns or questions, please feel free to contact us
Bestseller No. 4
Douper Lid Support Hinge, Toy Box Hinge Soft...
  • SOFT CLOSE DESIGN - Lid will slow the descent when the opening angle is less than 70°. Lid will lower gently, hold up without slamming shut and protect your fingers from being crushed
  • HOLDS LID OPEN - Never worry again about having to prop the lid open. Douper lid support hinge will hold your lid open until you are ready to close.
  • 70N-120N BEARING CAPACITY -- Holds up to 12lbs-25lbs/1pc. Weight support will be doubled with 2 hinges (25lbs-50lbs/ 2pcs)
  • OPEN ANGLE - The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 90 degrees angle.
  • EASY TO INSTALL - Each hinge can be used for right or left hand mounting, easy to install by following the install placement card.
Bestseller No. 5
Heavy Duty Lid Support Hinges Soft Close...
  • LID SUPPORT HINGE USAGE—The lid support hinge support the lids of box, such as toy box, cabinet, closet, wardrobe lids. Perfect for any lids or flaps when a soft closing motion is required.
  • KEEP THE LID OPEN--- The lid hinge will hold the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed.
  • WEIGHT CAPACITY 50LB—Lid stay max weight support 50lbs/2pcs, Lid support hinge can be mounted on the left or right side. , Upward door open adjustable angle of 75°,90°,110° by yourself.
  • DURABLE MATERIAL -- The up-grated version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance.
  • EASY TO INSTALL – Only following the placement measurements on the instructions, you can easy to install lid stay. Allen wrench and exclusive redesign Installation instruction in package.
Bestseller No. 6
Toy Box Hinges Soft Close - Lid Support...
  • KEEP LID STAY OPEN — The lid support hinge will hold the lid open until you want to close.Never worry about having to support lid by hand anymore.It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required.
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinge guarantee high performance.
  • EASY TO INSTALL — The lift and up hinges can be mounted on the left or right side,also used for side-mounting and top-mounting.Upward door open adjustable angle of 75°,90°,110°.It can fit for most lids and allow you to keep your lids stay at any angle.Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package!
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight.After installing the hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure,prevent lid from slamming shut.
  • CONDITIONED SOFT CLOSING — Only with this chest hinges supporting less than 50lbs and keeping two lid support soft close in same tension by your adjustment will soft closing function work perfectly!! It will go down slowly,and prevent fingers from getting smashed.
SaleBestseller No. 7
VOCOMO Lid Stay 105 Degree Open with Soft...
  • LID SUPPORT HINGE - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
  • SOFT CLOSE - Lids will lower slowly and gently to avoid slams shut and crush the little fingers of children.
  • 105 DEGREE OPEN - The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge can be used for right or left side mounting.
  • SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas.
  • EASY TO INSTALL - Easy to follow graphic installation instructions ensure a perfect install the first time.
Bestseller No. 8
Gas Spring, Gas Strut, Gas Shocks, Soft Close...
  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width <600mm/23.6in, and two for cabinet door width >600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door, 10N=2.2ib=1KG.
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is a problem with the product or installation difficulties, please contact customer service as soon as possible to send installation pictures or videos, thank you.
  • ★ Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use.*It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.
  • ★ Pressure:120N/26lb/12KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". 120N Gas Shocks suit best for the door weight 100N-120N,The door panel weighs more than 26lb, 12KG, it is not suitable for use. It will not be able to be supported, so use two or higher pressure models.
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.
Bestseller No. 9
BokWin 2Pcs 70N-120N Soft Close Lid Support...
  • 【Soft Close Design】: Lid will slow the descent when the opening angle is less than 70°. Lid will lower gently, hold up without slamming shut and protect your fingers from being crushed. When your opening degree is larger than 70°, the lid will keep staying in place.
  • 【70N-120N Bearing Capacity】: Holds up to 10lbs-18lbs/1Pc. Weight support will be doubled with 2 hinges (20lbs-36lbs/ 2Pcs).
  • 【Open Angle】: The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 90 degrees angle.
  • 【Holds Lid Open】: Never worry again about having to prop the lid open. The lid support hinge will hold your lid open until you are ready to close.
  • 【Easy to Install】: Package including 2Pcs Lid Support Hinge, comes with mounting hardware, each hinge can be used for right or left hand mounting, easy to install.
Bestseller No. 10
Color You 2 Pack Toy Box Lid Hinges Soft...
  • 【Notice:】These two toy box lid hinges are identical, regardless of the right and left, it can be install on both side of the box, just need to ensure the bases of two hinges are installed correct.
  • 【SOFT CLOSE LID HINGE】 The lid hinges can not only keep the lid open, without supporting it by hand, but also make the lid close slowly to avoid pinching fingers. It can be widely used in many types of wooden boxes, such as toy boxes, cupboard, storage cabinets, wardrobes, etc. It is just an excellent accessory to realize the soft closing function of the lid.
  • 【PREMIUN ZINC ALLOY MATERIAL】 The upgraded version of lid stays are made of high-quality zinc alloy, which has the greatest corrosion resistance and durability. The arc-shaped arms design makes the resistance better to achieve a perfect soft close effect. Compared with plastic clips, it has stronger bearing capacity and longer service life.
  • 【ADJUSTABLE TENSION】 The toy box hinges are designed with an adjustable device, you can use an Allen wrench to turn the screw in the middle of the lid hinge to adjust the soft close tension and bearing capacity. After installing, please adjust it to appropriate pressure according different weight of lids to avoid lids closing violently.
  • [MAXIMUM SUPPORT 50 LB】The maximum load capacity of each hinge is 25LB. When you use 2 support hinges and adjust the load capacity to the maximum, its maximum support capacity can reach 50 pounds. Please note that only two hinges adjusted to maintain the same tension, the soft-close function will be perfectly realized.

How Do You Buy The Best Soft Close Toy Chest?

Do you get stressed out thinking about shopping for a great soft close toy chest? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching soft close toy chest, which is why we have assembled a comprehensive list of the greatest soft close toy chest available in the current market. We’ve also come up with a list of questions that you probably have yourself. John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for soft close toy chest that you consider buying. Your questions might include the following:
  • Is it worth buying an soft close toy chest?
  • What benefits are there with buying an soft close toy chest?
  • What factors deserve consideration when shopping for an effective soft close toy chest?
  • Why is it crucial to invest in any soft close toy chest, much less the best one?
  • Which soft close toy chest are good in the current market?
  • Where can you find information like this about soft close toy chest?
We’re convinced that you likely have far more questions than just these regarding soft close toy chest, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can. Potential sources can include buying guides for soft close toy chest, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible soft close toy chest. Make sure that you are only using trustworthy and credible websites and sources. John Harvards provides an soft close toy chest buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available soft close toy chest currently available on the market. This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
  1. Brand Value: Every brand of soft close toy chest has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an soft close toy chest?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your soft close toy chest.
  5. Customer Ratings: Number ratings grade soft close toy chest objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their soft close toy chest.
  7. Product Quality: You don’t always get what you pay for with an soft close toy chest, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an soft close toy chest is should be an indication of how long it will work out for you.
John Harvards always remembers that maintaining soft close toy chest information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources. If you think that anything we present here regarding soft close toy chest is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Leave a Comment