20 Best 1/2 To 1/4 Reducer Pvc [2022]

Are you looking for the best 1/2 To 1/4 Reducer Pvc? Based on expert reviews, we ranked them. We've listed our top-ranked picks, including the top-selling 1/2 To 1/4 Reducer Pvc.

We Recommended:

# Preview Product
1 Spears 439 Series PVC Pipe Fitting, Bushing, Schedule 40, 1/2' NPT Male x 1/4' NPT Female Spears 439 Series PVC Pipe Fitting, Bushing, Schedule 40, 1/2" NPT Male x 1/4" NPT Female
2 TL TOOLEGIN 1/2' NPT Male x 1/4' NPT Female Brass Bushing Reducer Reducing Pipe Adapter Fitting 5pcs... TL TOOLEGIN 1/2" NPT Male x 1/4" NPT Female Brass Bushing Reducer Reducing Pipe Adapter Fitting...
3 Nigo Industrial Co. Brass Pipe Fitting, Hex Bushing Reducer, Nominal Pipe Size: 1/2' NPT Male x 1/4'... Nigo Industrial Co. Brass Pipe Fitting, Hex Bushing Reducer, Nominal Pipe Size: 1/2" NPT Male x...
4 SUNGATOR Brass Pipe Fitting, Reducer Adapter, 1/4' Male Pipe x 1/2' Female Pipe (2-Pack) SUNGATOR Brass Pipe Fitting, Reducer Adapter, 1/4" Male Pipe x 1/2" Female Pipe (2-Pack)
5 Spears 439 Series PVC Pipe Fitting, Bushing, Schedule 40, 3/4' NPT Male x 1/2' NPT Female (Pack of... Spears 439 Series PVC Pipe Fitting, Bushing, Schedule 40, 3/4" NPT Male x 1/2" NPT Female (Pack...
6 POWERTEC 70146 Eccentric Reducer, 4-Inch to 2-1/4-Inch , Black POWERTEC 70146 Eccentric Reducer, 4-Inch to 2-1/4-Inch , Black
7 SDTC Tech 2-Pack Brass Pipe Fitting 1/4' NPT Male to 1/2' NPT Female Reducer Adapter SDTC Tech 2-Pack Brass Pipe Fitting 1/4" NPT Male to 1/2" NPT Female Reducer Adapter
8 Quickun Stainless Steel Reducing Hex Bushing, 1/2' Male NPT to 1/4' Female NPT, Reducer Bushing Pipe... Quickun Stainless Steel Reducing Hex Bushing, 1/2" Male NPT to 1/4" Female NPT, Reducer Bushing...
9 Plumb Pak, White Keeney 46WK 1-1/4-Inch by 1-1/2-Inch Straight Extension Coupling Trap Adapter,... Plumb Pak, White Keeney 46WK 1-1/4-Inch by 1-1/2-Inch Straight Extension Coupling Trap Adapter,...
10 Supply Giant 6I4J Flexible Pvc Reducing Coupling with Stainless Steel Clamps, 1-1/2 x 1-1/4 Inch,... Supply Giant 6I4J Flexible Pvc Reducing Coupling with Stainless Steel Clamps, 1-1/2 x 1-1/4 Inch,...
11 Legines Brass Pipe Fitting, NPT Adapter 1/2' Female to 1/4' Male Reducing Adaptor 1200psi High... Legines Brass Pipe Fitting, NPT Adapter 1/2" Female to 1/4" Male Reducing Adaptor 1200psi High...
12 YZM 1/2' Female thread to 1/4' OD tube Tube Quick Connector fittings Water Purifiers Filters Reverse... YZM 1/2" Female thread to 1/4" OD tube Tube Quick Connector fittings Water Purifiers Filters...
13 Supply Giant 6I52 Flexible PVC Reducing Coupling with Stainless Steel Clamps, 2' x 1-1/4, Black Supply Giant 6I52 Flexible PVC Reducing Coupling with Stainless Steel Clamps, 2" x 1-1/4, Black
14 TAISHER 2PCS Forging of 304 Stainless Steel Reducer Hex Bushing, 1/2' Male NPT to 1/4' Female NPT,... TAISHER 2PCS Forging of 304 Stainless Steel Reducer Hex Bushing, 1/2" Male NPT to 1/4" Female...
15 GASHER 15PCS Brass Pipe Fitting, Hex Bushing, Reducer Adapter, Reducing Hex Nipple 3/8 Inch NPT x... GASHER 15PCS Brass Pipe Fitting, Hex Bushing, Reducer Adapter, Reducing Hex Nipple 3/8 Inch NPT x...
16 ANPTGHT 1/2' to 1/4' Hose Barb Reducer Pipe Fittings Adapter Plastic Joint connector Splicer Mender... ANPTGHT 1/2" to 1/4" Hose Barb Reducer Pipe Fittings Adapter Plastic Joint connector Splicer...
17 Canplas 193022 PVC DWV Reducing Coupling, 2 x 1-1/2-Inch, White Canplas 193022 PVC DWV Reducing Coupling, 2 x 1-1/2-Inch, White
18 POWERTEC 70147 Tapered Adapter, 4-Inch to 2-1/4-Inch POWERTEC 70147 Tapered Adapter, 4-Inch to 2-1/4-Inch
19 2-1/4' to 1 1/2'' Adaptor 2-1/4" to 1 1/2'' Adaptor
20 Malida 1/2' Thread Male to 1/4' Push Fit Tube Quick Connect for Water Purifiers Reverse Osmosis... Malida 1/2" Thread Male to 1/4" Push Fit Tube Quick Connect for Water Purifiers Reverse Osmosis...
Bestseller No. 1
Spears 439 Series PVC Pipe Fitting, Bushing, Schedule 40, 1/2" NPT Male x 1/4" NPT Female
  • Bushing for connecting two pipes with different diameters
  • Male NPT threads on one end and female NPT threads on the other for connecting two pipes with different ends
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal
  • Maximum operating temperature of 140 degrees F
  • Meets ASTM D1784 and D2466 standards for quality assurance, and certified by NSF International for potable water service
SaleBestseller No. 2
TL TOOLEGIN 1/2" NPT Male x 1/4" NPT Female Brass Bushing Reducer Reducing Pipe Adapter Fitting 5pcs...
  • 1/2" npt male to 1/4" npt female threads for connecting pipes with different ends
  • For use with LP and natural gas, refrigeration, and hydraulic applications
  • Max. Pressure: 1200 PSI ,Temperature range:-65 to 250 F.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
Bestseller No. 3
Nigo Industrial Co. Brass Pipe Fitting, Hex Bushing Reducer, Nominal Pipe Size: 1/2" NPT Male x 1/4"...
  • 1/2" NPT Male (Actual O.D: 0.840") x 1/4" NPT Female (Actual I.D: 0.440")
  • Please note: NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter
  • Max. Pressure: 1000 PSI WOG; Temperatures range from -65 to 250 F
  • Contains low-lead (no more than 2.5%); Not for potable/drinking water use
  • Constructed from extruded bar stock; Use with brass, steel, and iron pipe
SaleBestseller No. 4
SUNGATOR Brass Pipe Fitting, Reducer Adapter, 1/4" Male Pipe x 1/2" Female Pipe (2-Pack)
  • 【PREMIUM MATERIAL】: Premium solid brass, high strength, high hardness, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male...
  • 【EXCELLENT THREADS】: Precisely milled, tight threads, not easy to slip, deeper threads design for better meshing for enhancing fixation, smoother...
  • 【MULTI-FUNCTION】: Reducing adapter allows for connecting and extending different size air hoses, brass can be used with grease, fuels and natural...
  • 【FIRM AND DURABLE】: Having a longer service life than castings, heavy duty solid brass construction for corrosion resistance, high temperature...
  • 【STANDARD】: Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance
SaleBestseller No. 5
Spears 439 Series PVC Pipe Fitting, Bushing, Schedule 40, 3/4" NPT Male x 1/2" NPT Female (Pack of...
  • Bushing for connecting two pipes with different diameters
  • Male NPT threads on one end and female NPT threads on the other for connecting two pipes with different ends
  • PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal
  • Maximum operating temperature of 140 degrees F
  • Meets ASTM D1784 and D2466 standards for quality assurance, and certified by NSF International for potable water service
SaleBestseller No. 6
POWERTEC 70146 Eccentric Reducer, 4-Inch to 2-1/4-Inch , Black
  • Connect 2-1/4-Inch opening accessories to standard 4-Inch hose
  • Off-center opening position of 2-1/4-Inch end
  • Tough, durable ABS plastic material
  • 4-Inch nominal end measures 3-61/64-Inch O.D. and 3-45/64-Inch I.D.
  • 2-1/4-Inch nominal end measures 2-1/4-Inch O.D. and 2-Inch I.D.
Bestseller No. 7
SDTC Tech 2-Pack Brass Pipe Fitting 1/4" NPT Male to 1/2" NPT Female Reducer Adapter
  • REDUCER FITTING: 1/4" NPT Male Pipe x 1/2" NPT Female Pipe. The Brass Pipe Fitting Adapters are suitable for connecting pipes or fittings of different...
  • THREADS: Not easy to slip, the NPT threads create a tighter seal than straight threads, and smoother threads for easier and quicker installation.
  • MATERIAL: Made of premium solid brass, high strength and hardness, wear and corrosion resistance, more durable than iron / iron galvanized pipe...
  • USE: Work temperatures range from -53°C to 121°C (-65°F to 250°F), can be used with garden sprinkler, grease, fuels, refrigeration,...
  • STANDARD & NOTE: High quality assurance, can not used for potable water due to the fittings contain lead. For better sealing, we suggest that all...
Bestseller No. 8
Quickun Stainless Steel Reducing Hex Bushing, 1/2" Male NPT to 1/4" Female NPT, Reducer Bushing Pipe...
  • Type:Reducer Bushing(Male x Female),Connection:NPT-NPT,Measurement: 1/2" x 1/4"
  • Temperature range from -30 to +150 degrees F. Maximum working pressure of 150 psi.
  • NPT thread for creating tighter seals than straight threads.
  • This reducer hex bushing for connecting pipes or fittings with different end types, diameters, or materials.
  • Adapter for connecting pipes or hoses of different end types,diameters,or materials.
Bestseller No. 9
Plumb Pak, White Keeney 46WK 1-1/4-Inch by 1-1/2-Inch Straight Extension Coupling Trap Adapter,...
  • STRAIGHT EXTENSION COUPLING TRAP ADAPTER: Upgrade your home's plumbing with a heavy duty trap adapter
  • DURABLE POLYPROPYLENE: Durable extension coupling is made from polypropylene for long-lasting use
  • INCLUDES REDUCING WASHERS: Comes with reducing washers to ensure a perfect fit
  • HIGH-VISIBILITY DESIGN: White finish gives the trap adapter a classic look and makes it easy to see
  • EASY INSTALLATION: Features a 1.5" or 1.25" inlet and a 1.5" outlet that allow for slip joint connections for easy installation that saves you time
Bestseller No. 10
Supply Giant 6I4J Flexible Pvc Reducing Coupling with Stainless Steel Clamps, 1-1/2 x 1-1/4 Inch,...
  • Flexible Coupling Compatible with cast iron, , copper, lead, and steel piping
  • Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,
  • May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use
  • Each Rubber Fitting is marked with part number, size, and certifications
Bestseller No. 11
Legines Brass Pipe Fitting, NPT Adapter 1/2" Female to 1/4" Male Reducing Adaptor 1200psi High...
  • Reducing adapter allows for connecting and extending different size pipes or fittings, can be used with grease, fuels, LP and natural gas,...
  • 1/4" Male National Pipe Taper (NPT) threads on one end and 1/2" female NPT threads on the other for connecting pipes with different ends
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded.
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250...
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Bestseller No. 12
YZM 1/2" Female thread to 1/4" OD tube Tube Quick Connector fittings Water Purifiers Filters Reverse...
  • Material: POM(Polyoxymethylene), Polyethylene Plastic Tubing
  • Tube OD 1/4" ,Female Thread 1/2" quick connector
  • No special tools required, easy to install
  • Apply to Reverse Osmosis Water System Quick Conncetor
Bestseller No. 13
Supply Giant 6I52 Flexible PVC Reducing Coupling with Stainless Steel Clamps, 2" x 1-1/4, Black
  • Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping
  • Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration,
  • May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors
  • Conforms to ASTM C1173, CSA B602, Certified and UPC Approved, Rated for underground use
  • Each Rubber Fitting is marked with part number, size, and certifications
Bestseller No. 14
TAISHER 2PCS Forging of 304 Stainless Steel Reducer Hex Bushing, 1/2" Male NPT to 1/4" Female NPT,...
  • Product Type —— Reducer Hex Bushing(1/2"Male NPTx 1/4"Female NPT) with protective case,for industry connecting pipes or fittings with different...
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion.
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c.
  • Maximum Pressure —— Maximum working pressure is 2800PSI.
  • Please Note —— NPT thread size does not actual diameter, it is only nominal pipe size
Bestseller No. 15
GASHER 15PCS Brass Pipe Fitting, Hex Bushing, Reducer Adapter, Reducing Hex Nipple 3/8 Inch NPT x...
  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female...
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for...
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or...
  • Max. Pressure: 150 PSI WOG; Temperatures range from -65 to 250 F
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size.
SaleBestseller No. 16
ANPTGHT 1/2" to 1/4" Hose Barb Reducer Pipe Fittings Adapter Plastic Joint connector Splicer Mender...
  • 【Material】 Plastic barb connector, made of high-quality PP(Polypropylene) material
  • 【Connection】Can be connected with 1/2" Hose ID x 1/4" Hose ID.
  • 【Applicability】 It can withstand 125 psi (70°F) pressure and temperatures from -9°F to 175°F, but it is not resistant to oil
  • 【Product】 Smooth surface and inner wall, lightweight and durable
  • 【Use】Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and handing, and printing and labeling.
Bestseller No. 17
Canplas 193022 PVC DWV Reducing Coupling, 2 x 1-1/2-Inch, White
  • Injection molded in non-toxic durable white polyvinyl chloride (PVC).
  • Service temperature rated at (140F) 60C
  • For use in both the drainage and venting sections of the plumbing installation
  • Country of Origin: China
Bestseller No. 18
POWERTEC 70147 Tapered Adapter, 4-Inch to 2-1/4-Inch
  • Tapered ends for press-on fit
  • Increases air velocity
  • Tough, durable ABS plastic material
  • Durable construction stands up to hose-clamp pressure
  • Outlet diameters: 4" and 2-1/4"
Bestseller No. 19
2-1/4" to 1 1/2'' Adaptor
  • 2-1/4'' to 1-1/2'' adapter
  • Rugged ABS Plastic
  • Fits Common Shop Vacuums
  • Connect common 1-1/2" hose or 1-1/2" I.D. fittings -
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,...
Bestseller No. 20
Malida 1/2" Thread Male to 1/4" Push Fit Tube Quick Connect for Water Purifiers Reverse Osmosis...
  • Product Name: Straight 1/2“Npt to 1/4" Tube OD Push-in Connect Fittings,1/2" Male Thread Connector Adapter.
  • Easy Installation: New generation Non-Locking Clip technology offers an easy Diy Installation Without Tools Required, Just Push In to Connect.
  • Package Included: 1/2"Npt to 1/4" Tube OD Push To Connect Fitting,5 pcs.
  • Applications Include RO System Beverage Dispensing Refrigerator Ice Maker Coffee Machine etc.
  • Size&Tube Compatible With:1/4 inch Quick Connect fitting Size,Fits standard 1/4 od Tubing Used On Most Water Purification Systems. 

Having trouble finding a great 1/2 To 1/4 Reducer Pvc?

This problem is well understood by us because we have gone through the entire 1/2 To 1/4 Reducer Pvc research process ourselves, which is why we have put together a comprehensive list of the best 1/2 To 1/4 Reducer Pvcs available in the market today.

After hours of searching and using all the models on the market, we have found the best 1/2 To 1/4 Reducer Pvc for 2022. See our ranking below!

How Do You Buy The Best 1/2 To 1/4 Reducer Pvc?

Do you get stressed out thinking about shopping for a great 1/2 To 1/4 Reducer Pvc? Do doubts keep creeping into your mind?

We understand, because we’ve already gone through the whole process of researching 1/2 To 1/4 Reducer Pvc, which is why we have assembled a comprehensive list of the greatest 1/2 To 1/4 Reducer Pvc available in the current market. We’ve also come up with a list of questions that you probably have yourself.

John Harvards has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 1/2 To 1/4 Reducer Pvc that you consider buying. Your questions might include the following:

  • Is it worth buying an 1/2 To 1/4 Reducer Pvc?
  • What benefits are there with buying an 1/2 To 1/4 Reducer Pvc?
  • What factors deserve consideration when shopping for an effective 1/2 To 1/4 Reducer Pvc?
  • Why is it crucial to invest in any 1/2 To 1/4 Reducer Pvc, much less the best one?
  • Which 1/2 To 1/4 Reducer Pvc are good in the current market?
  • Where can you find information like this about 1/2 To 1/4 Reducer Pvc?

We’re convinced that you likely have far more questions than just these regarding 1/2 To 1/4 Reducer Pvc, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 1/2 To 1/4 Reducer Pvc, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 1/2 To 1/4 Reducer Pvc. Make sure that you are only using trustworthy and credible websites and sources.

John Harvards provides an 1/2 To 1/4 Reducer Pvc buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information.

How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 1/2 To 1/4 Reducer Pvc currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 1/2 To 1/4 Reducer Pvc has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 1/2 To 1/4 Reducer Pvc?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 1/2 To 1/4 Reducer Pvc.
  5. Customer Ratings: Number ratings grade 1/2 To 1/4 Reducer Pvc objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 1/2 To 1/4 Reducer Pvc.
  7. Product Quality: You don’t always get what you pay for with an 1/2 To 1/4 Reducer Pvc, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 1/2 To 1/4 Reducer Pvc is should be an indication of how long it will work out for you.

John Harvards always remembers that maintaining 1/2 To 1/4 Reducer Pvc information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 1/2 To 1/4 Reducer Pvc is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Related Post:

FAQ:

Q: What are the dimensions of PVC pipe?

A: PVC Pipe sizes are different than the size the pipe is called. For example, a 1 inch PVC Pipe is actually 1.315 inches in outside diameter, and 1.029 inches in inside diameter.

Q: What is PVC fitting?

A: What Is a PVC Fitting. Polyvinyl chloride (PVC) is a kind of plastic that can vary widely in use from clothing to inflatable products. Although it is widely used, more than half of the PVC manufactured is used to make piping and fittings. PVC is very lightweight and can withstand high temperatures.

Q: What is a PVC adapter?

A: Male PVC adapters are for making easy slip to male pipe thread connections with PVC pipe. Our durable PVC pipe male adapters are available in a variety of sizes. These PVC male adapter fittings are ideal for installing long runs of pipe in sprinkler systems without using pipe nipples to make connections.